Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Возврат к шагу #4

Редактировать с помощью Walter Galan -

Правка одобрена автор Walter Galan

До
После
Без изменений

Шаг Линий

[* black] WalkDisconnect the camera cable connector out of its socket with the tip of a spudger.
[* icon_note] It is recommended to carefully push on both sides of the connector to "walk" it out of its socket.
[* black] WalkDisconnect the camera cable connector out of its socket with the tip of a spudger.
[* icon_note] It is recommended to carefully push on both sides of the connector to "walk" it out of its socket.
[* black] Pull the camera cable parallel to the face of the I/O board toward the front edge of the Air to disconnect it from its socket.
[* icon_caution] Do not lift upward on this cable as you disconnect it, as its socket may break off the logic board.