Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Возврат к шагу #4

Редактировать с помощью Sam Goldheart -

Правка одобрена автор Sam Goldheart

До
После
Без изменений

Шаг Линий

[* black] Disconnect the camera cable connector out of its socket withwith the tip of a spudger.
[* icon_note] It is recommended to carefully pushPush first on both sidesone side of the connectorconnector, then on the other side to carefully "walk" it out of its socket.
[* black] Disconnect the camera cable connector out of its socket withwith the tip of a spudger.
[* icon_note] It is recommended to carefully pushPush first on both sidesone side of the connectorconnector, then on the other side to carefully "walk" it out of its socket.
[* black] Pull the camera cable parallel to the face of the I/O board toward the front edge of the Air to disconnect it from its socket.
[* icon_caution] Do not lift upward on this cable as you disconnect it, as its socket may break off the logic board.