Перейти к основному содержанию

Возврат к шагу #8

Редактировать с помощью kyle -

Правка отклонена автор Andrew Optimus Goldheart

Без изменений

Шаг Линий

[* red] Remove the six 6.3 mm T5 Torx screws securing the logic board to the upper case.
+ [* black] *The heat sink is also attached to the body on the end furthest from the logic board by one screw (not in pic) which must be removed or you will break the heat sink during removal.
[* icon_note] On some models these may be 4.1 mm T5 Torx screws.