Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Возврат к шагу #12

Редактировать с помощью Taylor Dixon -

Правка одобрена автор Taylor Dixon

До
После
Без изменений

Шаг Линий

[* black] Carefully remove the logic board assembly from the upper case, minding any cables that may get caught.
[* icon_reminder] During reassembly, make surereassembly:
[* black] Keep loose cables clear of the board so they aren't caught under it.
[* black] Make sure
the antenna cables are inserted into their respective notches on the logic boardnotches, as highlighted in the second picture.
[* icon_reminder] During reassembly, make sure the speaker cable doesn't get stuck under the logic board.
[* icon_reminder] During reassembly, make surereassembly:
[* black] Keep loose cables clear of the board so they aren't caught under it.
[* black] Make sure
the antenna cables are inserted into their respective notches on the logic boardnotches, as highlighted in the second picture.
[* icon_reminder] During reassembly, make sure the speaker cable doesn't get stuck under the logic board.