Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Возврат к шагу #12

Редактировать с помощью kyle -

Правка отклонена автор Andrew Optimus Goldheart

До
После
Без изменений

Шаг Линий

[* black] Carefully remove the logic board assembly from the upper case, minding any cables that may get caught.
[* black] *The heat sink is also attached to the body on the end furthest from the logic board by one screw (not in pic) which must be removed or you will break the heat sink during removal.
[* icon_reminder] During reassembly, make sure the antenna cables are inserted into their respective notches on the logic board, as highlighted in the second picture.