Перейти к основному содержанию

Изменения в этом шаге

Отредактированно Manuel Haeussermann -

Правка одобрена автор Manuel Haeussermann

До
После
Без изменений

Шаг Линий

-[title] Disconnect the battery
-[* black] Use a spudger or a clean fingernail to pry the battery connector up from its socket on the logic board.
+[title] Unscrew the battery connector shield
+[* black] Use a Y000 screwdriver to remove the the 0,9 mm screw securing the battery and display connector cover.
[* icon_note] Try not to damage the black silicone seal surrounding this and other board connections. These seals provide extra protection against water and dust intrusion.
[* black] Bend the connector slightly away from the logic board to prevent it from accidentally making contact with the socket and providing power to the phone during your repair.