Возврат к шагу #3
Отредактированно Dominik Schnabelrauch -
Правка одобрена автор Dominik Schnabelrauch
- До
- После
- Без изменений
Шаг Линий
| [title] Heat the front sensor assembly | |
| [* black] [guide|25705|Heat an iOpener|new_window=true] and apply it to the top edge of the screen for two minutes. | |
| - | [* icon_note] A hair dryer, [guide|151116|heat gun|new_window=true], or hot plate may also be used, but be careful not to overheat the phone—the display is susceptible to heat damage. |
| + | [* icon_note] A [guide|157348|hair dryer|new_window=true], [guide|151116|heat gun|new_window=true], or hot plate may also be used, but be careful not to overheat the phone—the display is susceptible to heat damage. |