Возврат к шагу #4
Отредактированно Alex Diaz-Kokaisl -
Правка одобрена автор Alex Diaz-Kokaisl
- До
- После
- Без изменений
Шаг Линий
| - | [* |
|---|---|
| + | [* black] Support your iPhone on something sturdy such as a hardcover book so it rests hands-free and parallel to the ground; this makes it easier to work with in the following steps. |
| [* black] Use a hair dryer to heat along the bottom edge of the iPhone. The glass should feel slightly too hot to touch. | |
| [* icon_note] For complete instructions on how to use a hair dryer, [guide|157348|check out this guide|new_window=true]. | |
| [* black] Wait one minute to give the adhesive a chance to release and present an opening gap. | |
| [* black] Insert an opening pick under the rear glass when the Anti-Clamp creates a large enough gap. | |
| [* icon_note] If the Anti-Clamp doesn't create a sufficient gap, apply more heat to the area and rotate the handle a quarter turn. | |
| [* icon_caution] Don't crank more than a quarter turn at a time, and wait one minute between turns. Let the Anti-Clamp and time do the work for you. | |
| [* black] ***Skip the next two steps.*** |