Перейти к основному содержанию

Возврат к шагу #2

Отредактированно Manuel Haeussermann -

Правка одобрена автор Manuel Haeussermann

До
После
Без изменений

Шаг Линий

[title] Pry up the earpiece speaker
[* black] Insert the pointed end of a spudger underneath the right edge of the earpiece speaker.
-[* black] Tilt the back of the spudger downwards to pry up the earpiece speaker.
+[* black] Pry up with the spudger to loosen the earpiece speaker.
[* icon_reminder] The top right edge of the earpiece speaker is equipped with a rubber gasket. During reassembly, make sure the gasket lines up with its recess in the frame correctly.