Перейти к основному содержанию

Возврат к шагу #13

Редактировать с помощью Ben Eisenman -

На одобрении

До
После
Без изменений

Шаг Линий

-[* black] Remove the following screws securing the logic board to the upper case:
- [* red] Seven 3.5 mm Phillips screws.
+[* black] Remove the following screws:
+ [* red] Eight 3.5 mm T6 Torx screws securing the logic board to the upper case.
[* orange] Two T6 Torx screws securing the DC-In board to the upper case.
[* icon_caution] Do not remove the logic board yet! There are connectors attached to the underside of the logic board that must first be disconnected.

Изображение 1

Старая версия

Новая версия