Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Запчасти и инструменты

Возврат к шагу #7

Редактировать с помощью Sam Goldheart -

Правка одобрена автор Sam Goldheart

Удален
Добавлено
Без изменений

Шаг Линий

[* black] Logic board remains.
[* icon_reminder] When reassembling your logic board, be sure the rubber gasket is installed correctly. The nub on the gasket should mate with the hole cut into the logic board near the heat sink fins.
[* icon_note] The rubber gasket should attach to the end of the heat sink as seen in the secondthird picture.
[* icon_note] The rubber gasket should attach to the end of the heat sink as seen in the secondthird picture.