Перейти к основному содержанию

Изменения в этом шаге

Edit by Walter Galan

На одобрении

Без изменений

Шаг Линий

[* black] Use a spudger to flip up the black plastic tab holding the remaining ribbon cable in place. The black will rotate up 90 degrees, releasing the ribbon cable.
[* icon_caution] The tab is very fragile, so be careful when flipping it up to unlock the cable and down to lock the cable.
[* icon_note] The plastic tab may be white (instead of black) on some iPhone models.
[* black] Slide the ribbon cable out of its connector, and remove the display assembly from the iPhone.

Image 1

Нет предыдущего изображения