Перейти к основному содержанию

Возврат к шагу #9

Редактировать с помощью Sam Goldheart -

Правка одобрена автор Sam Goldheart

До
После
Без изменений

Шаг Линий

-[* black] Finish wheeling the opening tool to the bottom of the right side of the display.
-[* icon_note] At this point, you'll want to run the tool through the entire gap again, to ensure you cut as much adhesive as possible.
+[* black] Finish pushing the opening tool to the bottom of the right side of the display.
+[* icon_note] At this point, you'll want to run the tool back around the entire display, to ensure you cut as much adhesive as possible.