Перейти к основному содержанию

Изменения в этом шаге

Редактировать с помощью steadfast I and I -

На одобрении

До
После
Без изменений

Шаг Линий

-[* black] If you are only replacing the hard drive, you may skip removal of the Bottom Shield and DC-in board.
+[* black] If you are only replacing the hard drive, you may skip removal of the Bottom Shield and DC-in board (steps 23 through 28).
+[* black] However, during re-assembly, it is a good idea to peek under the front port-side corner of the Bottom Shield to make sure the hard drive cable connector is firmly in place.