Возврат к шагу #5
Отредактированно Alex Diaz-Kokaisl -
Правка одобрена автор Alex Diaz-Kokaisl
- До
- После
- Без изменений
Шаг Линий
| + | [title] Insert an opening pick |
|---|---|
| + | [* icon_note] If your display is badly cracked, [guide|140533|covering it with a layer of clear packing tape|new_window=true] may allow the suction cup to adhere. Alternatively, [link|https://guide-images.cdn.ifixit.com/igi/NgVMfmOgJwEalMFF.full|very strong tape|new_window=true] may be used instead of the suction cup. If all else fails, you can superglue the suction cup to the broken display. |
| + | [* black] Apply a suction handle to the display as close to the center of the right edge as possible. |
| + | [* black] Pull up on the suction handle with a strong, steady force to create a small gap between the frame and display. |
| + | [* icon_caution] The large display is very fragile. Only create a gap big enough to insert an opening pick. |
| + | [* icon_note] If you're having trouble making a gap, reapply a heated iOpener to the right edge for two minutes. |
| + | [* black] Insert an opening pick into the gap. |
| + | [* icon_caution] Don't insert the pick more than 5 mm to avoid damaging the display. |
Изображение 1
Нет предыдущего изображения
Добавлено
Изображение 2
Нет предыдущего изображения
Добавлено
Изображение 3
Нет предыдущего изображения
Добавлено