Перейти к основному содержанию

Возврат к шагу #20

Отредактированно Alex Diaz-Kokaisl -

Правка одобрена автор Alex Diaz-Kokaisl

До
После
Без изменений

Шаг Линий

+[title] Reposition the display
+[* icon_caution] Don't fully remove the display, as it's attached to the frame by several cables.
+[* black] Grab two opposing corners of the display and separate it from the frame.
+ [* icon_note] If the display feels stuck, slide your opening picks around the perimeter to separate any remaining adhesive. Pay attention to sensitive areas shown in previous steps.
+[* red] Shift the display towards the bottom right corner of the frame until the ribbon cable near the top edge is uncovered.

Изображение 1

Нет предыдущего изображения

Добавлено

Изображение 2

Нет предыдущего изображения

Добавлено

Изображение 3

Нет предыдущего изображения

Добавлено