Перейти к основному содержанию

Возврат к шагу #20

Отредактированно Alex Diaz-Kokaisl -

Правка одобрена автор Alex Diaz-Kokaisl

До
После
Без изменений

Шаг Линий

[title] Reposition the screen
[* icon_caution] Don't fully remove the screen, as it's attached to the frame by several cables.
-[* black] Grab two opposing corners of the screen and separate it from the frame.
+[* black] Grab two opposing corners of the screen and lift up to separate it from the frame.
[* icon_note] If the screen feels stuck, slide your opening picks around the perimeter to separate any remaining adhesive. Pay attention to sensitive areas shown in previous steps.
[* red] Shift the screen towards the bottom right corner of the frame until the ribbon cable near the top edge is uncovered.