Возврат к шагу #2
Отредактированно Alex Diaz-Kokaisl -
Правка одобрена автор Alex Diaz-Kokaisl
- До
- После
- Без изменений
Шаг Линий
[* black] Pull the strip out slowly and steadily at a low angle. Give it plenty of time to stretch and un-stick from under the battery. | |
- | [* black] If the adhesive strip breaks off, try to retrieve it using your fingers or blunt tweezers, and continue pulling—but |
- | [* black] If the adhesive strip breaks off, try to retrieve it using your fingers or blunt tweezers, and continue pulling—but |
- | [* icon_note] If you removed all of the stretch-release adhesive, skip to [guide|157139|this step|stepid=328754 |
+ | [* black] If the adhesive strip breaks off, try to retrieve it using your fingers or blunt tweezers, and continue pulling—but don't pry under the battery. |
+ | [* black] If the adhesive strip breaks off, try to retrieve it using your fingers or blunt tweezers, and continue pulling—but don't pry under the battery. |
+ | [* icon_note] If you removed all of the stretch-release adhesive, skip to [guide|157139|this step|stepid=328754]. Otherwise, follow the next two steps for each battery cell with remaining adhesive. |