Перейти к основному содержанию

Возврат к шагу #2

Отредактированно Jeff Suovanen -

Правка одобрена автор Jeff Suovanen

До
После
Без изменений

Шаг Линий

-[* black] Remove the following four screws securing the power supply to the rear case:
- [* red] Two 23.7 mm T10 screws.
- [* orange] Two 7.3 mm T10 screws.
+[* black] Remove the following four screws securing the power supply to the rear case (size T8 or T10 depending on the exact model):
+ [* red] Two 23.7 mm Torx screws
+ [* orange] Two 7.3 mm Torx screws