Почините Свои Вещи Сообщество Магазин

Возврат к шагу #4

Отредактированно Clay Eickemeyer -

Правка одобрена автор Clay Eickemeyer

До
После
Без изменений

Шаг Линий

[* black] Depress the tab on the DC power cable connector, then pull it straight out of its socket on the back of the logic board.
-[* black] Warning: The DC power cable connector may be very hard to disconnect. I ended up choosing NOT disconnect this connector and removed both the power supply board AND motherboard with this cable still connected together.
+ [* icon_note] If the cable is too difficult to disconnect, you can remove the power supply board and motherboard together.