Перейти к основному содержанию

Изменения к шагу №4

Отредактированно Dan H -

Правка отклонена автор Scott Havard

Удален
Добавлено
Без изменений

Шаг Линий

[* black] Push the release on the back of the connector, then Pull the DC power cable straight out of its socket on the back of the logic board. ** You must release it, as it will not just pull out.
[* black] Push the release on the back of the connector, then Pull the DC power cable straight out of its socket on the back of the logic board. ** You must release it, as it will not just pull out.