Перейти к основному содержанию

Возврат к шагу #4

Редактировать с помощью Michael Ybarra -

Правка отклонена автор Andrew Optimus Goldheart

До
После
Без изменений

Шаг Линий

[* black] Remove the following screws from the front of the logic board:
[* red] Two 23.7 mm T10 screws.
[* orange] Four 7.4 mm T10 screws.
[* yellow] One 20.8 mm T25 spacer screw. (NOT on 27" Model)
[* yellow] One 20.8 mm T25 spacer screw. (NOT on 27" Model)
[* green] One captive T10 screw.
[* icon_note] This screw is beneath a hole in the logic board. You'll need a fixed screwdriver or the 60 mm extension from an iFixit driver kit to reach it.

Изображение 1

Старая версия

Новая версия