Перейти к основному содержанию

Возврат к шагу #4

Редактировать с помощью Sam Goldheart -

Правка одобрена автор Sam Goldheart

До
После
Без изменений

Шаг Линий

[* black] Remove the following screws from the front of the logic board:
[* red] Two 23.7 mm T10 screws.
[* orange] Four 7.4 mm T10 screws.
[* yellow] One 20.8 mm T25 spacer screw.
[* green] One captive T10 screw.
[* icon_note] This screw is beneath the logic board, but accessible via a hole throughin the logic board. You'll need a fixed screwdriver or the 60 mm extension from an iFixit driver kitkit to reach it.
[* icon_note] This screw is beneath the logic board, but accessible via a hole throughin the logic board. You'll need a fixed screwdriver or the 60 mm extension from an iFixit driver kitkit to reach it.