Возврат к шагу #1
Отредактированно Jeff Suovanen -
Правка одобрена автор Jeff Suovanen
- До
- После
- Без изменений
Шаг Линий
| - | [* red] Remove the four 7.5 mm |
|---|---|
| - | [* icon_note] These screws are set inside large, spring-loaded Phillips #2 screws. To prevent the larger screws from spinning when you loosen the |
| + | [* red] Remove the four 7.5 mm T8 screws from behind the GPU on the logic board. |
| + | [* icon_note] These screws are set inside large, spring-loaded Phillips #2 screws. To prevent the larger screws from spinning when you loosen the T8 screws, hold them with a fingertip or Phillips #2 screwdriver. |