Перейти к основному содержанию

Возврат к шагу #1

Отредактированно Sebastian -

Правка одобрена автор Sebastian

До
После
Без изменений

Шаг Линий

[title] Remove the antenna
[* black] The board with the NFC antenna is glued to the bottom cover with adhesive tape.
-[* black] To remove the board, gently pry one of the edges of the board with a plastic pick to peel off the adhesive tape.
+[* black] To remove the board, gently pry one of the edges of the board with a [product|IF145-123|plastic pick] to peel off the adhesive tape.
[* black] Gently pull out the rest of the board by hand.