Перейти к основному содержанию

Возврат к шагу #18

Редактировать с помощью Sam Goldheart -

Правка одобрена автор Sam Goldheart

До
После
Без изменений

Шаг Линий

+[* black] With the cards inserted as shown near the corners, gently twist the cards to increase the gap between display and case.
+[* black] If there are any sections that seem to stick and won't separate, stop twisting and use one of the cards to cut the adhesive in the problem area.
+[* black] Begin to lift the top of the display up from the frame.
+[* icon_caution] Only lift the display a few inches—it is still attached to the iMac by data and power cables.