Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Запчасти и инструменты

Возврат к шагу #8

Редактировать с помощью Sam Goldheart -

Правка одобрена автор Sam Goldheart

До
После
Без изменений

Шаг Линий

[* icon_caution] '''Be very careful''' not to touch the capacitor leads or any exposed solder joints on the back of the power supply. Only handle the board by the edges.
[*
icon_note] While still holdingFlip the top of the power supply only by its edges, flip it overtowards you, like opening a mailbox, to give access to the DC outpower cable connection behind the logic board.
[* black] Squeeze the DC outpower cable connector and pull it straight out of its socket on the back of the logic board.
[* icon_caution] '''Be very careful''' not to touch the capacitor leads or any exposed solder joints on the back of the power supply. Only handle the board by the edges.
[*
icon_note] While still holdingFlip the top of the power supply only by its edges, flip it overtowards you, like opening a mailbox, to give access to the DC outpower cable connection behind the logic board.
[* black] Squeeze the DC outpower cable connector and pull it straight out of its socket on the back of the logic board.