Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Возврат к шагу #8

Редактировать с помощью Dayton -

Правка одобрена автор Dayton

До
После
Без изменений

Шаг Линий

[* black] Use the T-handle to rotate the entire pump rod clockwiseclockwise several full turns.
[* black] Use the T-handle to rotate the entire pump rod clockwiseclockwise several full turns.
[* icon_note] The foot valve is threaded and will screw into the base of the traveling valve, allowing you to pull the two valves up out of the well together.
[* black] Keep turning until the resistance greatly increases. The foot valve should then bewill provide this resistance when fully screwed into the traveling valvevalve base.
[* black] Keep turning until the resistance greatly increases. The foot valve should then bewill provide this resistance when fully screwed into the traveling valvevalve base.