Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Возврат к шагу #12

Редактировать с помощью Dayton -

Правка одобрена автор Dayton

До
После
Без изменений

Шаг Линий

[* black] ContinueMake sure there is at least 6 inches of space between the joint and the rod clamp to allow yourself enough room to work. If necessary, continue pulling the pump rod up out of the well.
[* black] Pull
well before tightening the rod up past the next jointclamp to ensure sufficient spacing.
[* black] ContinueMake sure there is at least 6 inches of space between the joint and the rod clamp to allow yourself enough room to work. If necessary, continue pulling the pump rod up out of the well.
[* black] Pull
well before tightening the rod up past the next jointclamp to ensure sufficient spacing.