Перейти к основному содержанию

Возврат к шагу #3

Редактировать с помощью Bruce Johnson -

Правка одобрена автор Walter Galan

До
После
Без изменений

Шаг Линий

[* black] Use a pair of tweezers to pull the vertical sync ribbon cable out of its socket on the LED driver board near the top left corner of your iMac.
[* black] Note: on some iMacs this is not a ribbon cable but 4 separate, very fine and very fragile wires. Be very careful, if the tweezers slip off the plug, you will very likely pull a wire out of the assembly.