Перейти к основному содержанию

Возврат к шагу #6

Редактировать с помощью Jake Devincenzi -

Правка одобрена автор Jake Devincenzi

До
После
Без изменений

Шаг Линий

[* black] Lift the display for enough clearance to disconnect the LCD thermal sensor cable connector from its socket on the logic board.
[* icon_note] If your fan is spinning full speed after completion, check this connection or the hard drive's thermal sensor cable. The thermal sensor connector socket is very fragilefragile, so be very careful when you connect back the sensor cable!cable.
[* icon_note] If your fan is spinning full speed after completion, check this connection or the hard drive's thermal sensor cable. The thermal sensor connector socket is very fragilefragile, so be very careful when you connect back the sensor cable!cable.