Возврат к шагу #10
Отредактированно Alex Diaz-Kokaisl -
Правка одобрена автор Alex Diaz-Kokaisl
- До
- После
- Без изменений
Шаг Линий
| [title] Clean the USB-A port with isopropyl alcohol | |
| [* black] Follow [guide|164767|this guide|new_window=true] to make a custom cotton swab. | |
| [* icon_note] [link|https://www.amazon.com/GUM-Soft-Picks-Original-Dental-Picks/dp/B079KFZKR7?th=1|Dental picks with barbed tips|new_window=true] (non-flavored) can also be used. | |
| [* icon_note] You ''can'' use a normal cotton swab, but most are too thick and have loose cotton that can snag on sharp edges. | |
| [* black] Apply a few drops of highly-concentrated isopropyl alcohol (>90%) to the cotton. | |
| [* black] Insert your tool in the USB-A port. | |
| - | [* icon_caution] Don't force the tool into the port, as you risk damaging the contacts. |
| - | [* black] |
| + | [* icon_caution] Don't force the tool into the port, as you risk damaging the contacts and getting the tool stuck. |
| + | [* black] Slide the tool back and forth along the port to clean it. |
| [* black] Wait a few minutes for the isopropyl alcohol to evaporate before plugging in your device and testing it. |