Возврат к шагу #7
Редактировать с помощью Walter Galan -
Правка одобрена автор Walter Galan
- До
- После
- Без изменений
Шаг Линий
[* black] Remove the following screws securing the exhaust duct |
[* black] Remove the following screws securing the exhaust duct |
[* red] Two 6.3 mm T8 screws |
[* orange] Two 4.7 mm T8 screws |
[* yellow] Four 7.2 mm T10 screws on the logic board |
[* icon_caution] Remove the exhaust duct screws before the logic board screws, to prevent putting stress on the heat sink heat pipes. |
Изображение 2
Удален