Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Возврат к шагу #9

Редактировать с помощью Sam Goldheart -

Правка одобрена автор Sam Goldheart

До
После
Без изменений

Шаг Линий

[* black] Tilt the top of the logic board slightly forwardaway from the rear case.
[* black] Lift the logic board straight up and out of the iMac. Be careful not to snag the board on any of the rear case's screw posts attached toposts.
[* icon_note] The I/O boards at the insidebottom of the rear caselogic board will be the greatest challenge, go slowly and pull gently to avoid damage.
[* black] Tilt the top of the logic board slightly forwardaway from the rear case.
[* black] Lift the logic board straight up and out of the iMac. Be careful not to snag the board on any of the rear case's screw posts attached toposts.
[* icon_note] The I/O boards at the insidebottom of the rear caselogic board will be the greatest challenge, go slowly and pull gently to avoid damage.