Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Возврат к шагу #9

Редактировать с помощью Theo Mat -

Правка одобрена автор Theo Mat

До
После
Без изменений

Шаг Линий

[* black] Tilt the top of the logic board away from the rear enclosure.
[* black] Lift the logic board straight up and out of the iMac.
[* icon_caution] Be careful not to snag the board on any of the rear case's screw posts.
[* icon_note] The I/O boards at the bottom of the logic board will be the greatest challenge. It is recommended to pull gently to avoid any damage.
[* icon_reminder] During reassembly of the logic board, pay attention to the position of the I/O connectors. When the board is back in the case, insert a USB or Thunderbolt cable into one of the connectors to align it perfectly.