Перейти к основному содержанию

Возврат к шагу #19

Отредактированно Alex Diaz-Kokaisl -

Правка одобрена автор Alex Diaz-Kokaisl

До
После
Без изменений

Шаг Линий

+[title] Disconnect the screen
+[* black] Insert the point of a spudger under the top right corner of the screen's press connector.
+[* black] Gently pry up and disconnect the cable.
+[* icon_note] To re-attach press connectors, carefully align and press down on one side until it clicks into place, then repeat on the other side. Don't press down in the middle. If the connector is misaligned, the pins can bend and cause permanent damage.

Изображение 1

Нет предыдущего изображения

Добавлено

Изображение 2

Нет предыдущего изображения

Добавлено