Возврат к шагу #3
Отредактированно Clay Eickemeyer -
Правка одобрена автор Clay Eickemeyer
- До
- После
- Без изменений
Шаг Линий
| + | [title] Remove the stretch release adhesive |
|---|---|
| + | [* black] Pull one of the pull tabs out from under the battery until you can grip it with your fingers or wrap it [link|https://guide-images.cdn.ifixit.com/igi/gstgPwAPTUNJJtPU.huge|around your tool|new_window=true]. |
| + | [* black] Hold the phone steady using its sides—don't press down on the battery. |
| + | [* black] Pull the strip slowly and evenly. Keep it at as low of an angle as possible without dragging on other components. |
| + | [* black] Continue pulling, re-gripping or wrapping it around your tool as you go, until the strip fully releases from under the battery. |
| + | [* icon_note] If the strip breaks off, try to retrieve it. If you can't grip it from under the battery, move on to the next step. |
| + | [* black] Repeat this for the other two strips. |
Изображение 1
Нет предыдущего изображения
Добавлено
Изображение 2
Нет предыдущего изображения
Добавлено
Изображение 3
Нет предыдущего изображения
Добавлено