Почините Свои Вещи Сообщество Магазин

Возврат к шагу #5

Отредактированно Clay Eickemeyer -

Правка одобрена автор Clay Eickemeyer

До
После
Без изменений

Шаг Линий

[title] Remove the stretch release adhesive
-[* black] Use your blunt nose tweezers or your fingers to grip the entire length of an adhesive strip's pull tab.
-[* black] Twist your tweezers to roll the adhesive strip over itself and slowly pull it at a low angle out from under the battery.
+[* black] Use your blunt nose tweezers to grip the entire length of an adhesive strip's pull tab.
+[* black] Twist your tweezers to roll the adhesive strip over itself and pull it slowly, evenly, and at a low angle out from under the battery.
[* icon_note] Give the strip plenty of time to stretch. Avoid dragging it over cables or components as you pull.
- [* icon_note] If you're using your fingers, re-grip the strip often so it doesn't stretch unevenly.
+[* icon_note] If you're using your fingers, re-grip the strip often so it doesn't stretch unevenly.
[* black] Repeat this for the other strip.
[* icon_note] If a strip breaks off, try to retrieve it from under the battery. If you can't retrieve it, don't worry—move on to the next step for an alternate method.