Перейти к основному содержанию

Возврат к шагу #1

Редактировать с помощью Sam Goldheart -

Правка одобрена автор Sam Goldheart

До
После
Без изменений

Шаг Линий

-[* black] The rear plastic cover is the point of entry for the 7th generation Nano. Carefully lay the iOpener over the plastic tab to loosen the adhesive.
+[* icon_note] The rear plastic cover is the point of entry for the 7th generation Nano.
+[* black] Carefully lay the iOpener over the plastic tab to loosen the adhesive. Let the bag sit on the device for approximately 90 seconds before attempting to open the panel.