Перейти к основному содержанию

Возврат к шагу #8

Редактировать с помощью Vaughn Higginbotham -

Правка одобрена автор Sam Goldheart

До
После
Без изменений

Шаг Линий

[* black] Use a metal spudger to carefully pry near the Lightning connector and under ***all*** parts of the front panel assembly: the front glass/digitizer, the LCD display and the metal midframe.
-[* icon_note] The adhesive under the metal midframe/display assembly is quite strong and the components are fragile, so go slowly and gently.
+[* icon_note] The adhesive under the metal midframe/display assembly is quite strong and the components are fragile, so go slowly and gently. Make sure you do not bend the LCD screen.