Перейти к основному содержанию

Возврат к шагу #10

Редактировать с помощью Sam Goldheart -

Правка одобрена автор Sam Goldheart

До
После
Без изменений

Шаг Линий

[* black] Gently pull the logic board assembly out of the lower case.
[* icon_caution] If there is any resistance, there may still be adhesive securing the partscables or components. Do not attempt to remove the assembly without further gentle spudgering. Failure to do so may result in torn ribbon cables.
[* icon_caution] If there is any resistance, there may still be adhesive securing the partscables or components. Do not attempt to remove the assembly without further gentle spudgering. Failure to do so may result in torn ribbon cables.