Почините Свои Вещи Сообщество Магазин

Изменения в этом шаге

Отредактированно Clay Eickemeyer -

Правка одобрена автор Clay Eickemeyer

До
После
Без изменений

Шаг Линий

[title] Reassembly information
-[* icon_reminder] During reassembly, follow these instructions to reconnect the screen cable.
+[* icon_reminder] During reassembly, follow these instructions to reconnect the screen cable. This may be tricky, so work carefully and take your time.
[* black] Use angled tweezers to grip the pull tab on the neck of the screen cable.
- [* black] Lower the angle of the tweezers to align the connector with the socket on the motherboard.
+ [* black] Angle the cable so it's lined up and parallel to the socket, rotating the tips of the tweezers as necessary to get the right angle.
[* icon_note] The end of the cable needs to be flat to the motherboard—not angled downward.
[* black] Gently insert the connector into the socket until the white line meets the body of the socket.
[* icon_note] If the connector doesn't smoothly enter the socket, realign it and try again.