Перейти к основному содержанию

Возврат к шагу #1

Редактировать с помощью Evan Noronha -

Правка одобрена автор Evan Noronha

До
После
Без изменений

Шаг Линий

-[* black] Peel up the six cable loops securing the antenna cables to the upper case. .
+[* red] Peel up the six cable loops securing the antenna cables to the upper case.
+ [* icon_note] In some models there are seven cable loops.
[* black] Gently pull the cable loops slightly out of the channel cut into the upper case one at a time.
[* black] Use your spudger to open up the plastic loops as you de-route the antenna cables through them.
-[* icon_reminder] Repeat this for all of the retaining loops
+[* icon_reminder] Repeat this for each retaining loop until the antenna cables are free from the upper case.