Возврат к шагу #3
Отредактированно Ivan G de la Rosa -
Правка одобрена автор Ivan G de la Rosa
- До
- После
- Без изменений
Шаг Линий
| [title] Release the Cartridge Reader | |
| - | [* black] To release the cartridge reader look for 4 solder points, 2 on each side of the reader (see image) and apply heat to them to melt the solder and take out the reader. |
| + | [* black] To release the cartridge reader look for 4 solder points, 2 on each side of the reader (see image) and apply heat to them to melt the solder and take out the reader. Use a spludger to lift the reader out of the board as you apply heat . |
| [* black] You can apply some solder flux or even some new solder wire to form an alloy between the old and new metals, this would ease the task. | |
| [* icon_caution] CAUTION: soldering iron can cause severe burns if not used properly, proceed with caution and have an adult in the room with you if underage. |