Перейти к основному содержанию

Изменения к шагу №2

Отредактированно sergioballesterosgomez -

Правка отклонена автор Andrew Optimus Goldheart

Удален
Добавлено
Без изменений

Шаг Линий

[* black] Pull the camera cable away from its socket on the logic board.
[* icon_caution] Pull the connector parallel to the face of the logic board, not straight up.
[* icon_caution] Very important: This cable is also needed for the Airport & Bluetooth card to work. Just one pin bent can cause this parts to not function at all.