Перейти к основному содержанию

Changes to Step #6

Edit by Andrew Bookholt

На одобрении

Без изменений

Шаг Линий

[* icon_note] This step is only for glossy display machines. If you have an anti-glare display, skip this step.
[* red] Remove the two 8 mm Phillips screws securing the camera cable retainer to the upper case.
[* icon_reminder] One of the screws may remain captive in the camera cable ground loop. If replacing the display, be sure to transfer this screw to the new unit.
[* black] Lift the camera cable retainer out of the upper case.