Перейти к основному содержанию

Возврат к шагу #6

Редактировать с помощью Scott Dingle -

Правка одобрена автор Scott Dingle

До
После
Без изменений

Шаг Линий

[* black] Disconnect the LCD thermal sensor cable connector from its socket on the logic board.
-[* black] Carefully pull the display toward the top edge of your iMac and lift it out of the outer case, minding any cables that may get caught.
+[* icon_note] If your fan is spinning full speed after completion, check this connection or the hard drive's thermal sensor cable.