Возврат к шагу #1
Отредактированно Andrew Bookholt -
- До
- После
- Без изменений
Шаг Линий
| + | [* icon_caution] The next few steps bring your hands close to the exposed face of the power supply. To avoid a high voltage shock from the many large capacitors attached to the board, ***do not*** touch the face of the power supply. |
|---|---|
| [* black] Remove the following four screws securing the power supply to the outer case: | |
| [* red] Two 22.2 mm fine-thread T10 Torx | |
| [* orange] One 25 mm coarse-thread T10 Torx | |
| [* yellow] One 9 mm coarse-thread T10 Torx |