Возврат к шагу #2
Отредактированно David Rios -
Правка одобрена автор David Rios
- До
- После
- Без изменений
Шаг Линий
| [* black] Remove the 4 hex screws(9mm) under the motor on each arm of the drone, then the 2 hex screws (6mm) next to those previous 4. | |
| - | [* black] The final hex screw(9mm) is next to the landing gear legs. The total number of screws should be 28, then use a screwdriver to remove the 1 Philips head screw(9mm) on each arm. |
| + | [* black] The final hex screw(9mm) is next to the landing gear legs, then use a screwdriver to remove the 1 Philips head screw(9mm) on each arm. |
| + | [* icon_note] The total number of screws should be 28 |