Возврат к шагу #4
Отредактированно Spencer Pennington -
Правка одобрена автор Spencer Pennington
- До
- После
- Без изменений
Шаг Линий
| + | [title] Insert an opening pick |
|---|---|
| + | [* black] Use a [guide|157348|hair dryer|new_window=true] or [guide|151116|heat gun|new_window=true] to heat the bottom edge of the screen until it's hot to the touch. |
| + | [* icon_caution] Be careful not to heat the phone hotter than this—the battery is susceptible to heat damage. |
| + | [* black] Wait one minute to give the adhesive a chance to release and present an opening gap. |
| + | [* icon_note] If a gap doesn't appear after one minute, apply more heat and rotate the handle a quarter turn. Let the Anti-Clamp and time do the work for you. |
| + | [* black] Insert an opening pick into the gap. |
| + | [* black] Remove the Anti-Clamp using the pull tabs on the suction cups. |
| + | [* black] ***Skip the next two steps.*** |
Изображение 1
Нет предыдущего изображения
Добавлено
Изображение 2
Нет предыдущего изображения
Добавлено